Candy Cane Spinner Mount

3D Printed mounting system for the Gilbert Engineering Candy Cane Spinner. The mounts work with both the Love and Without Love versions and can be ordered to fit either 1/2″ EMT conduit or 1/2″ PVC pipe. They are zip tied to the coro and and provide a frame structure to increase strength and allow mounting to various surfaces. A 1/2″ PVC cross is utilized at the center junction to connect the perpendicular sections. EMT is recommended for added rigidity since one of the EMT sections can run continuously through the PVC cross at the center of the prop with the EMT to PVC bushings that are included with the EMT version. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

Important: The hole patterns on the Candy Cane Spinner are slightly asymmetric to the center line of the prop by a couple of millimeters. However the mounts themselves are symmetrical, so it is recommended to use a long straight edge to mark the horizontal and vertical center lines of the prop and center the outer mounts on the true center line. Do not to use the pixel holes to line up the outer mounts. The mounts have large enough pixel openings to account for this discrepancy. Before fully tightening the zip ties on the mounts, run the EMT or PVC through all the mount pieces so the position can be adjusted as necessary.