MOAW Mount


3D Printed mounting system for the newer style of Gilbert Engineering Mother of all Wreaths with the 12 sided center opening. If you have the older style (2019 version) with the round center opening please contact us as we are only making those to order. The mounts are zip tied to the coro and provide a frame structure to increase strength and allow mounting to various surfaces. Available in either ‘cross style’ or ‘parallel style’ designs and both 1/2″ EMT conduit and 1/2″ PVC pipe versions. On the cross style mount a 1/2″ PVC cross is utilized at the center junction to connect the perpendicular sections. With these high density props EMT is recommended due to the increased weight of all the pixels. EMT also provides added rigidity since one of the EMT sections can run continuously through the PVC cross at the center of the prop with the EMT to PVC bushings that are included with the EMT cross style version. When making your mount selection, please choose whether or not your MOAW has backer plates which are used to reinforce a prop that was slit for shipping. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

IMPORTANT IF ORDERING THE CROSS STYLE VERSION – The backer plates on the MOAW have gone though many different revisions. A change was made to the backer plates around mid 2020 through early 2021 where the backer plates did not extend to the edge of the prop. This is important because our top and bottom mounts on the cross style version are designed to sit on top of the backer plates and rely on them extending to the edge of the prop. These shorter backer plates do not fully support the prop mounts and will need to utilize an additional filler strip to add support to the edge of the prop. If you are ordering a cross style mount and your MOAW has backer plates that do not extend to the edge of the prop, then include a note with your order than you need the filler strip. 

SKU: GE-MOAW Category: Tag:

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product on backorder we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with backordered items is less than a week, it can fluctuate from time to time around 1-2 weeks. Very large orders can also experience longer than normal processing times as well. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. Additionally very large orders could have longer delays due to the vast number of printer hours required for production of the parts. We will contact you and let you know the expected production time if it were to exceed the estimated timeline for very large orders. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
Pin Share
Weight N/A
Mount Style

Cross Style, Parallel Style

Mount Type

1/2" EMT, 1/2" PVC

Backer Plates

Yes, No


There are no reviews yet.

Be the first to review “MOAW Mount”