Star 36-370 Mount STL
3D Printed mounting system for the Gilbert Engineering Star 36-370. These mounts have been completely redesigned to eliminate the need to use the stock coro clamps to attach the vertical pipe to the star. The mounts can be built in two conduit configurations based on how you plan to mount the star to the topper. The 1/2″ threaded pipe with 1/2″ EMT is the original version where the vertical support is threaded pipe which then threads into a floor flange that is installed on the topper. The 3/4″ EMT version allows one to use Maker Pipe fittings to attach the EMT conduit to the topper. Both versions are included with the download.
The bottom and top mounts are the primary connection to the topper and the support conduit attaches slightly different compared to our other mounts in order to increase strength. At each mount a 2.5″ long 1/4 x 20 machine screw is inserted on the top of the mount and attaches to a 1/4 x 20 nut that you insert into the underside of the mount. This creates an incredibly strong post that will support the primary loads of the topper. The horizontal supports are made with either 1/2″ or 3/4″ EMT conduit (depending on the version utilized) and at the center junction point a 3/4″ PVC cross is used to connect the threaded pipe or EMT conduit using the included bushings file. On all versions you want the vertical support conduit to run continuously between the top and bottom mounts with the horizontal span made from two shorter pieces.
There are no reviews yet.