Many of the the pixel holes on the Small World are not symmetric about the horizontal or vertical centerlines of the prop and vary by a few millimeters, this is most apparent on the center mount. To compensate for this variation the impacted pixel holes on the mount are elliptical and are placed at the average center point of the pixels. The mounts should be placed on the prop where the alignment averages out between the pixel and zip tie holes. We recommend not fully tightening the zip ties until the conduit is fully inserted to allow for small adjustment of the final fit.
As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.
3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.
All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.
Reviews
There are no reviews yet.