Singing Bulbs Mount

$19.95$27.95

3D Printed mounting system for the Gilbert Engineering Singing Bulbs. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces or for ground installations. Mounts are available for the small 30″ bulbs and the medium 46″ bulbs. Upright or hanging orientations do not matter with these mounts as they fit both styles.* The mounts are sized to fit either 1/2″ PVC pipe or 1/2″ EMT conduit and are designed to be zip tied to the coro. They feature a hole on the top where a screw can be inserted through the mount and into the PVC or EMT to secure it in place. There are two styles available depending on your installation needs, a single mount and a double mount. The double mount was primarily designed for those who are doing ground installations as it will resist twisting and EMT is recommended for this installation. Two pieces of 1/2″ rebar can be inserted into the ground and then slide the EMT over top of the rebar. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

*There is a small difference (about 4mm) in the vertical placement of the pixels between the upright and hanging versions of the 46″ bulb. The holes in the mounts average out this distance and thus will not be perfectly centered around the pixel opening, but there is still ample clearance around the holes to insert the pixels.

SKU: GE-SING Category: Tag:

As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
Pin Share
Weight N/A
Size

Small 30", Medium 46"

Style

Single Mount, Double Mount

Mount Type

1/2" PVC, 1/2" EMT

Reviews

There are no reviews yet.

Be the first to review “Singing Bulbs Mount”
Facebook
YouTube