Rosa Wreath 46 Mount

3D Printed mounting system for the Gilbert Engineering Rosa Wreath 46″. There are two versions of mounts depending on the size of the opening at the center of the prop. The original version has an opening of just under 6 inches and the new version has an approximate opening of 3.75 inches. If you have an Impression series prop with a solid center, please select the 3.75″ center when ordering. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces. The mounts can be ordered to fit either 1/2″ EMT conduit or 1/2″ PVC pipe and are designed to be zip tied to the coro. They feature a hole on the top where a screw can be inserted through the mount and into the EMT or PVC to secure it in place. A 1/2″ PVC cross is utilized at the center junction to connect the perpendicular sections. On these high density props EMT is recommended due to the increased weight of all the pixels. EMT also provides added rigidity since one of the EMT sections can run continuously through the PVC cross at the center of the prop with the EMT to PVC bushings that are included with the EMT version. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

The Rosa Wreath has some zip tie holes that our outer mounts utilize. The holes cut on the coro are not centered relative to the centerline of the prop and this would require separate mounts for each side in order to align which is unnecessary and inefficient. The holes on our mounts are perfectly centered and thus will not completely align with the precut hole, but will still be usable.