Poor Mans Pixel Pole Mounts – PVC


3D Printed mounting system for the Gilbert Engineering Poor Mans Pixel Pole utilizing 1/2″ PVC pipe for the mounting material. PVC is suitable for mounting against a structure or for use on vinyl siding with our special Poor Mans Pixel Pole Vinyl Siding Corner Clips. For stand alone poles please see the EMT version of the Poor Mans Pixel Pole Mounts. These mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces. The 99 node, 3 pixels across version changed mid year in 2022. The older versions were approximately 3.25″ wide and the new versions are approximately 4″ wide. Please check which version you have prior to ordering.

IMPORTANT: These mounts are sold a la carte and 3 mounts are required per section in order to adequately support the pixel poles. One for each end and one in the middle. A special coupler version can be used to bridge two sections together. For example a one section pixel pole would require 3 standard mounts and a two section tall pixel pole would require 4 standard mounts and one coupler. If you have any questions please contact us prior to ordering. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

SKU: GE-PMPP-PVC Category: Tag:

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
Pin Share
Weight N/A
Pixel Pole Version

99 Node, 3 Pixels Across (Current Version – Approx 4" wide), 99 Node, 3 Pixels Across (Original Version – Approx 3.25" wide), 200 Node, 4 Pixels Across

Mount Version

Standard, Coupler


There are no reviews yet.

Be the first to review “Poor Mans Pixel Pole Mounts – PVC”

You may also like…