Poor Mans Pixel Pole Mounts – 600 Node EMT

3D Printed mounting system for the Gilbert Engineering Poor Mans Pixel Pole 600 Node poles utilizing two spans of 1/2″ EMT conduit for the mounting material. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces. There are 3 separate mounts in this design, a base mount, a standard mount, and a coupler mount that is designed to sit on top of the backer plate at the mid section. The mounts can be purchased as a set per the renderings which include 1 base mount, 1 coupler mount and 3 standard mounts. The individual sections can also be purchased a la carte allowing you to customize the layout to your project. The 1/2″ EMT conduit will slide over 1/2″ rebar that you drive into the ground which helps stabilize the base of the pole and prevents twisting. Unless you are attaching the poles to a structure that can support the whole span, it is imperative to use multiple sets of guy wires on the poles. Four separate guy wires should be installed to the EMT near the top and also at mid span for a total of 8 guy wires. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.