Meanwell LRS Mounting Rack STL

These are the STL files to make our mounting racks which allow for stacking multiple Meanwell LRS 350 or 600 power supplies together on a single mounting rack. There are two available styles, a staggered configuration and a stacked configuration. The staggered configuration offsets the additional power supplies by approximately 16mm so there is easy access to the terminals on all power supplies. The stacked configuration has the power supplies directly over top of each other. This saves space, but makes access to the lower power supply terminals difficult and connections will likely need to be fully made on the lower power supplies first before installing the upper power supplies. M4x8mm screws are used to secure the power supplies to the mounting rack with four screws used on each power supply. The rack also includes four mounting holes on the bottom for attaching it to your project surface using screws or bolts of your choosing, such as a #8 x 1/2″ sheet metal screw. Our other accessory mounts to Meanwell LRS power supplies will work on the top power supply in combination with this rack by placing it between this mount and the power supply* and utilizing slightly longer M4 screws. 

Note: This is a digital purchase for STL files and not a physical product.