STL Files

King Diamond Mount STL

Name: King Diamond Mount STL
SKU: 6758
Availability: InStock

$15.00

This STL file set contains everything needed to 3D print the mounting system designed specifically for the Gilbert Engineering King Diamond 47″ x 41″ prop. The brackets are designed to be zip-tied directly to the coro and sized for 1/2″ EMT conduit, which slides through the mounts to form the frame. At the center junction, a 1/2″ PVC cross is used to connect the perpendicular conduit sections, using the included bushings file to adapt for EMT’s slightly smaller diameter. Once the conduit is in place, it is fastened to the mounts with screws, locking everything together to create a strong, rigid structure behind the prop. This setup provides excellent stability for mounting to various surfaces and is especially useful for reinforcing props that have been split for shipping. More information below.

Note: This is a digital purchase for STL files and not a physical product.

Category: STL Files Tag: Gilbert Engineering STLs

Description
Reviews (0)

As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link.

The King Diamond mounts utilize zip tie tunnels on the center mount which need to be installed from the front side of the prop. Click this link for a video showing an example of zip tie tunnel installation.

Please follow and like us: