Grand Illusion Mount 20mm STL

Name: Grand Illusion Mount 20mm STL
SKU: 2080
Availability: InStock

$15.00

3D Printed mounting system for the Gilbert Engineering Grand Illusion. The mounts provides a frame structure behind the coro to increase strength and allow mounting to various surfaces. The STL files contain special versions made for 20mm conduit and a bushing that allows for a 25mm PVC cross to be used for the center junction. There are two versions of mounts depending on the size of the opening at the center of the prop. The original version was made up until about mid 2020 and has an opening of approximately 20 centimetres and the new version has an approximate opening of 10 centimetres. Please select which version you have.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC Cross

Note: This is a digital purchase for STL files and not a physical product.

Version

Clear

SKU: N/A Category: STL Files Tag: Metric Conduit STLs

The very first Grand Illusions that were made prior to mid 2020 have a larger circular opening at the center of the prop. In the unlikely event that you have one of these older versions or think you may have one, please message us prior to ordering so we can verify and make a different style of center mount for the prop.

As with all our designs we strive to utilize the precut zip tie hole locations for our mounts, but making additional holes is sometimes necessary. On the Grand Illusion the center mount holes were moved inward from the original location and are now very close to the edge of the prop as well as being very tightly spaced. This could lead to the zip ties tearing the coro, so we have elected to retain the original zip tie locations for better strength, but you will have to make new zip tie holes on the coro. For the top and bottom mounts we utilize some additional holes beyond the premade ones.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link.

Please follow and like us: