ChromaStar 46 Mount

$34.95$35.95

3D Printed mounting system for the Boscoyo Studios ChromaStar 46. These mounts are designed to add additional strength and provide a more solid mounting point when attaching the ChromaStar 46 to a mega tree topper. There are two conduit sizes to choose from; a combination 1/2″ threaded pipe and 1/2″ EMT conduit where the threaded pipe can connect to a floor flange installed on the topper, or alternatively 3/4″ EMT conduit which is compatible with Maker Pipe fittings. Both styles utilize a 3/4″ PVC cross for the center junction which in combination with the supplied bushings, allow the conduit and / or threaded pipe to slide through. The vertical section of threaded pipe or conduit rests on top of the stock Boscoyo center support clamps which will then align with the height of the mounts. Due to the close proximity of the PVC cross to the center coro support clamps, you will need to trim away some material on the support clamps to provide enough clearance for the PVC cross to fit. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

SKU: BS-CS46 Category: Tag:

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
Pin Share
Weight N/A
Star Version

3 Ring, 6 Ring

Conduit Size

1/2" Threaded Pipe w/ 1/2" EMT (For use with a floor flange), 3/4" EMT (For use with Maker Pipe fittings)

Reviews

There are no reviews yet.

Be the first to review “ChromaStar 46 Mount”
Facebook
YouTube