For freestanding installation use 1/2″ rebar and drive the rebar into the ground. Then slide the pixels poles over top of the rebar and use landscape stakes in the holes on the base mount to prevent turning. Wind and height can make a secure installation challenging. Try and utilize 3 feet or longer rebar and go at least 1.5 feet into the ground depending on soil. The deeper the rebar goes into the ground and the taller it sticks out and fits inside of the EMT, the stronger your pixel pole will stand. Anything more than one section for the 99 and 200 node poles will almost certainly need some form of guy wires to stand up to wind events. Even at only one section tall, a strong wind can take its toll and knock down the poles. So if you are in a wind prone area it may make sense to utilize guy wires regardless of height. The 600 node version will always require guy wires to stabilize as it’s massive!
Reviews
There are no reviews yet.