Showstopper Mini Tree Mount

This 3D printed mounting system is designed specifically for the EFL Showstopper Mini Tree. The mounts are secured to the coro with zip ties and provide a rigid frame structure that increases the strength of the tree while allowing it to be mounted to various surfaces. Two mounting styles are available: Basic and Mega. The Basic version consists of four mounts along the centerline of the tree that support a single piece of 3/4″ EMT conduit. The Mega version adds outrigger mounts designed primarily to help stabilize the tree during ground installations. The outrigger mounts are sized for 1/2″ EMT conduit, allowing 1/2″ rebar to be driven into the ground and inserted inside the conduit, while the center mounts retain their 3/4″ EMT sizing. Because the tree is 55″ tall, these mounts are not intended to be the sole support system. The tree should either be attached to a solid structure such as a fence post or porch column, supported with a separate EMT framework using Maker Pipe fittings, or stabilized using guy wires attached directly to the EMT. A Maker Pipe support framework can be fabricated using additional EMT and fittings to create angled supports extending from the tree, forming a rigid triangular structure. Please select the mounting style you would like when ordering. Colors may vary, although black is most common. If you have a specific color request for black or white please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes the 3D printed parts only; conduit, rebar, screws, zip ties, and Maker Pipe fittings are not included.