ChromaStar 36 Mount 20mm STL

3D Printed mounting system for the Boscoyo Studios ChromaStar 36. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The STL files contain special versions made for 20mm conduit and a bushing file that allows for a 25mm PVC cross to be used for the center junction where the two sections of conduit come together. The vertical section of conduit is designed to rest on top of the stock Boscoyo center support clamps which will then align with the height of the mounts. Due to the close proximity of the PVC cross to the center coro support clamps, you will need to trim away some material on the support clamps to provide enough clearance for the PVC cross to fit.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC Cross

Note: This is a digital purchase for STL files and not a physical product.