Spiro Mount 20mm STL


3D Printed mounting system for the Gilbert Engineering Spiro 47″. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized to fit 20mm conduit and are designed to be zip tied to the coro. The conduit slides through the mounts with the center junction utilizing a 25mm PVC cross which allows the smaller conduit to pass through with the included bushing file. The conduit is then secured to the mounts using screws to lock the mounting frame in place to the prop. More information below.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC Cross

Note: This is a digital purchase for STL files and not a physical product. 

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

The Spiro mounts utilize zip tie tunnels on the outer mount which need to be installed from the front side of the prop. Click this link for a video showing an example of zip tie tunnel installation. 

Please follow and like us:
Pin Share


There are no reviews yet.

Be the first to review “Spiro Mount 20mm STL”