PPD Wreath Mount UK STL
3D Printed mounting system for the Boscoyo Studio PPD Wreath. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces. The STL files contain special versions made for 20mm conduit available from Screwfix and a bushing that allows for a 25mm PVC cross to be used for the center junction. They are zip tied to the coro and and provide a frame structure to increase strength and allow mounting to various surfaces.
The orientation shown of the PPD Wreath in these renderings is correct and matches the xLights model and the original concept from PPD. The orientation shown on the Boscoyo website is incorrect and when making the slit on the prop for shipping, they are slitting down the wrong axis (where the V notch is located) which is 11.25 degrees off from the points. The result is that the slit does not pass under the outer mounts. However the center mount being circular, will provide support around the slit and the frame in general does provide some support. What this means to you is that our outer mounts cannot directly help to stabilize the slit and you may desire to add additional reinforcements around the slit. If you have any questions don’t hesitate to ask us.