Lollipop Mount

For freestanding installation use 1/2″ rebar and drive the rebar into the ground. Then slide the lollipop over top of the rebar and use landscape stakes in the holes on the base mount to prevent turning. Wind can pose a challenge to secure the props. Try and utilize 3 feet or longer rebar and go at least 1.5 feet into the ground depending on soil. The deeper the rebar goes into the ground and the taller it sticks out and fits inside of the EMT, the stronger your pixel pole will stand. If you have strong winds you may need to add a stabilizing guy wire to secure the prop in addition to the rebar and landscape stakes.

As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

Our goal is to get your order shipped as quickly as possible. Most orders, including made to order items, ship within 3 to 5 business days, and many ship even sooner. If we anticipate processing times exceeding this, the most up-to-date estimated processing times will be displayed in a banner at the top of the website.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.