Hattitude Quartet Mount

$45.95

3D Printed mounting system for the Gilbert Engineering Hattitude Quartet. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts can be ordered to fit either 1/2″ EMT conduit or 1/2″ PVC pipe (EMT is recommended for strength) and are designed to be zip tied to the coro. The conduit slides through the mounts with the center junction utilizing a 1/2″ PVC cross which on the EMT version allows the smaller EMT conduit to pass through with the included bushings. The conduit is then secured to the mounts using screws to lock the mounting frame in place to the prop. When making your mount selection, please choose whether or not your Hattitude Quartet has the center backer plate which are used to reinforce a prop that was slit for shipping. The two side backer plates are not used with these mounts and may be discarded. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only.

SKU: GE-QRT Category: Tag:

As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
fb-share-icon
Tweet
Pin Share
Weight N/A
Mount Type

1/2" EMT, 1/2" PVC
Backer Plates

Yes, No

Reviews

There are no reviews yet.

Be the first to review “Hattitude Quartet Mount”

Related products

Facebook
YouTube