Singing Tree Mounts 20mm STL


3D Printed mounting system for the Gilbert Engineering Singing Trees. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized to fit 20mm conduit and are designed to be zip tied to the coro.

In order to construct the center horizontal conduit brace, two 25mm PVC T fittings can be inserted along the vertical sections of conduit using the included bushings file that allows the conduit to fit inside of the PVC. For ground installations rebar can be driven into the ground and the conduit can slide over the rebar to hold the prop in place. At a minimum the rebar should go into the ground at least 18″ and extend into the prop 18″. Guy wires or additional conduit structure like the one illustrated is highly recommended for those that experience winds.

The pictures depict the 36″ version, but when you make your selection a photo showing the mount layout for that version will be displayed.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC T Fitting

Note: This is a digital purchase for STL files and not a physical product. 




SKU: N/A Category: Tag:
Weight 33.99 oz
Tree Size

30 inch, 36 inch, 46 inch


There are no reviews yet.

Be the first to review “Singing Tree Mounts 20mm STL”