*On the large size tree the left and right mid bottom mounts may require a single spice of the pixel strings on each side to add additional wire to clear around the mounts.*
GE Flat Mini Tree Mounts STL
$25.00 – $30.00
3D Printed mounting system for the Gilbert Engineering Flat Mini Trees. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts can be made in two styles, a basic mount or a mega mount and the STL download contain all the files necessary to make either version. The basic mount consists of 2-4 mounts (depending on tree size) on the centerline of the tree that support a single piece of EMT conduit. The mega mount version adds on outrigger mounts that are primary intended to help stabilize the trees during ground installation as 1/2″ rebar can be driven into the ground and inserted inside of the EMT conduit. The mini and small sizes use 1/2″ EMT conduit while the medium size uses 3/4″ EMT for the center support and 1/2″ EMT for the outrigger supports. Mounts for the large size utilize 1″ EMT conduit for the main frame and have two short sections that use 1/2″ EMT which are intended to provide a snug fit when inserting over rebar. For the medium and large sizes, these mounts are not intended to be the sole support system. You will either need to attach the mounts to a solid structure like a fence post or porch column or use guy wires that are attached directly to the EMT. For ground installations 1/2″ rebar should be inserted at least 2′ into the ground and extend above the ground the full height of the outrigger mounts. To see the mount orientation for a specific size, please use the drop down menu to make your selection and the appropriate image will be displayed. Take 25% off automatically when purchasing 2 or more sizes of GE Flat Mini Tree Mounts. Discount will be reflected in cart. (As an option for additional support beyond what’s depicted, one could use PVC cross fittings with our bushings and add a horizontal EMT section to connect the vertical runs of EMT.)
Note: This is a digital purchase for STL files and not a physical product.