STL Files

Kings Ransom Mount 46 20mm STL

$15.00

3D Printed mounting system for the Gilbert Engineering Kings Ransom 46 Inch Flake. The mounts provides a frame structure behind the coro to increase strength and allow mounting to various surfaces. The STL files contain special versions made for 20mm conduit and a bushing that allows for a 25mm PVC cross to be used for the center junction. The mounts themselves are designed to be zip tied to the coro and they feature a hole on the top where a screw can be inserted through the mount and into the conduit to secure it in place. More information below.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC Cross

Note: This is a digital purchase for STL files and not a physical product.

Category: STL Files Tag: Metric Conduit STLs

Description
Reviews (0)

The model for the Kings Ransom is designed so that the crowns are located at the 4 cardinal points, however the existing zip tie holes are only located on the points between the crowns. Since keeping the orientation correct per the xLights model is most important; the mounts are designed to reflect that orientation and as such you will have to make your own zip tie holes in the prop for the mounts. You can learn more about this by clicking on the link below for general mount installation instructions.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link.

Please follow and like us: