Kings Ransom 46 Mount STL

$15.00

3D Printed mounting system for the Gilbert Engineering Kings Ransom 46 Inch Flake. The mounts provides a frame structure behind the coro to increase strength and allow mounting to various surfaces. The STL download includes all files needed to print the mounts to fit either 1/2″ EMT conduit or 3/4″ EMT conduit. The mounts themselves are designed to be zip tied to the coro and they feature a hole on the top where a screw can be inserted through the mount and into the EMT to secure it in place. The center junction is made using a 1/2″ or 3/4″ PVC cross (depending on conduit size used) which allows the smaller EMT conduit to pass through utilizing EMT to PVC bushings which the file is also included. More information below.

Note: This is a digital purchase for STL files and not a physical product.

The model for the Kings Ransom is designed so that the crowns are located at the 4 cardinal points, however the existing zip tie holes are only located on the points between the crowns. Since keeping the orientation correct per the xLights model is most important; the mounts are designed to reflect that orientation and as such you will have to make your own zip tie holes in the prop for the mounts. You can learn more about this by clicking on the link below for general mount installation instructions.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link.

Please follow and like us: