Medium NSR Tree Mount
Medium NSR Tree Mount - Image 2
Medium NSR Tree Mount - Image 3
Medium NSR Tree Mount - Image 4
Medium NSR Tree Mount - Image 5
Medium NSR Tree Mount - Image 6
Medium NSR Tree Mount - Image 7
Medium NSR Tree Mount - Image 8

Medium NSR Tree Mount

Price range: $31.95 through $56.95

This 3D printed mounting system is designed specifically for the EFL Medium NSR Tree. The mounts are secured to the coro with zip ties and provide a rigid frame structure that increases the strength of the tree while allowing it to be mounted to various surfaces. Two mounting styles are available: Basic and Mega. The Basic version consists of three mounts along the centerline of the tree that support a single piece of 3/4″ EMT conduit. The Mega version adds outrigger mounts designed primarily to help stabilize the tree during ground installations. The outrigger mounts are sized for 1/2″ EMT conduit, allowing 1/2″ rebar to be driven into the ground and inserted inside the conduit, while the center mounts retain their 3/4″ EMT sizing. Because the tree is 46″ tall, these mounts are not intended to be the sole support system. The tree should either be attached to a solid structure such as a fence post or porch column, supported with a separate EMT framework using Maker Pipe fittings, or stabilized using guy wires attached directly to the EMT. A Maker Pipe support framework can be fabricated using additional EMT and fittings to create angled supports extending from the tree, forming a rigid triangular structure. Please select the mounting style you would like when ordering. Colors may vary, although black is most common. If you have a specific color request for black or white please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes the 3D printed parts only; conduit, rebar, screws, zip ties, and Maker Pipe fittings are not included.

 

SKU: EFL-NSR Category: Tag:

Note that the pixel holes on the star are slightly offset from the corresponding holes on the rest of the prop by a few millimeters. To accommodate this variation, the holes on the star mount are oversized and made elliptical, allowing for some adjustment during installation. We recommend finding the centerline of the tree below the star and using it as a reference when positioning the star mount.

As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts when possible. On the Medium NSR Tree there are only a couple of zip tie hole locations and none of those are located where the mounts need to be fabricated for optimum support. This means you will need to create additional holes in the coro to secure the mounts with zip ties.

General instructions for attaching mounts to coro props, including zip tie hole alignment, can be found by clicking this link. 

Our goal is to get your order shipped as quickly as possible. Most orders, including made to order items, ship within 3 to 5 business days, and many ship even sooner. If we anticipate processing times exceeding this, the most up-to-date estimated processing times will be displayed in a banner at the top of the website.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Reviews

There are no reviews yet.

Be the first to review “Medium NSR Tree Mount”

Related products