3D Printed mounting system for the mammoth sized Gilbert Engineering SuperStar. With such a large prop you need a serious mounting solution. Fourteen distinct mounts sized for 3/4″ EMT conduit help provide a frame structure behind the coro to increase strength and allow mounting to various surfaces. The junction points utilize 3/4″ PVC fittings and which work with the included EMT bushing file. A total of 1 cross and 5 T’s are utilized. In addition to screwing into the EMT at each mount, at each junction it is recommended to either glue the bushings into the PVC or drill though the PVC and the bushing and into the EMT before securing them with a screw. See the diagram for recommended EMT configuration and mount locations. The mounts themselves are numbered starting top down and left to right.