Nash Tree Mount STL


3D Printed mounting system for the Gilbert Engineering Nash Tree. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized to fit 1/2″ EMT conduit and are designed to be zip tied to the coro. They feature a hole on the top where a screw can be inserted through the mount and into the EMT to secure it in place. In order to construct the center horizontal EMT brace, two 1/2″ PVC T fittings can be inserted along the vertical sections of EMT using the included EMT to PVC bushings file allow the EMT to fit inside of the PVC. For ground installations 1/2″ rebar can be driven into the ground and the EMT can slide over the rebar to hold the prop in place. At a minimum the rebar should go into the ground at least 18″ and extend into the prop 18″. Guy wires or additional EMT structure like the one illustrated may be necessary for those that experience high winds. Note that the Nash Tree is an asymmetric prop with a front and back side and thus the mounts only will only fit on the back side of the prop. You can reference these renderings which show the mounts attached to the back side of the prop as well as the model within xLights to determine the correct orientation.


There are no reviews yet.

Be the first to review “Nash Tree Mount STL”