Monster Flake Mount STL
3D printed mount for the mammoth sized Gilbert Engineering Monster Flake. There are 17 mounts sized for 3/4″ EMT conduit that make a frame structure behind the coro to help increase strength and allow for mounting to various surfaces. Traditionally the mounts are secured to the coro with zip ties, but screws with washers and lock nuts can be utilized as well. The junction points utilize 3/4″ PVC fittings; 4 elbows, 3 crosses, and 2 T’s are required and will utilize 26 EMT to PVC bushings which allow the EMT to pass through the 3/4″ PVC fittings. The bushing file is included with the purchase. In addition to screwing into the EMT at each mount, at each junction it is recommended to either glue the bushings into the PVC or drill though the PVC and the bushing and into the EMT before securing them with a screw.