Singing Tree Mounts STL


3D Printed mounting system for the Gilbert Engineering Singing Trees. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized to fit 1/2″ EMT conduit and are designed to be zip tied to the coro.

In order to construct the center horizontal EMT brace, two 1/2″ PVC T fittings can be inserted along the vertical sections of EMT using the included bushings file that allows the EMT to fit inside of the PVC. For ground installations 1/2″ rebar can be driven into the ground and the EMT can slide over the rebar to hold the prop in place. At a minimum the rebar should go into the ground at least 18″ and extend into the prop 18″. Guy wires or additional EMT structure like the one illustrated is highly recommended for those that experience winds.

The pictures depict the 36″ version, but when you make your selection a photo showing the mount layout for that version will be displayed.

Note: This is a digital purchase for STL files and not a physical product. 

SKU: N/A Category: Tag:
Weight 33.99 oz
Tree Size

30 inch, 36 inch, 46 inch


There are no reviews yet.

Be the first to review “Singing Tree Mounts STL”