GE Flat Mini Tree Mounts Metric STL


3D Printed mounting system for the Gilbert Engineering Flat Mini Trees. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts can be made in two styles, a basic mount or a mega mount and the STL download contain all the files necessary to make either version. The mini, small and medium size mounts are designed to fit 20mm conduit and the large size is designed for 25mm conduit with the short sections of outside mounts designed for 20mm conduit. The files for each size contain all the parts to make either the basic mount version consisting of 2-5 mounts (depending on tree size) on the centerline of the tree or the mega mount version which adds on outrigger mounts that are primary intended to help stabilize the trees during ground installation as 1/2″ rebar can be driven into the ground and inserted inside of the conduit. For the medium and large sizes, these mounts are not intended to be the sole support system. You will either need to attach the mounts to a solid structure like a fence post or porch column or use guy wires that are attached directly to the conduit. For ground installations 1/2″ rebar should be inserted at least 2′ into the ground and extend above the ground the full height of the outrigger mounts. To see the mount orientation for a specific size, please use the drop down menu to make your selection and the appropriate image will be displayed. Take 25% off automatically when purchasing 2 or more sizes of GE Flat Mini Tree Mounts. Discount will be reflected in cart. (As an option for additional support beyond what’s depicted, one could use PVC cross fittings with our bushings and add a horizontal conduit section to connect the vertical runs of conduit.)

For those in the UK, the links below are where you can get the conduit.

Link to 20mm Conduit

Link to 25mm Conduit

Note: This is a digital purchase for STL files and not a physical product. 


SKU: N/A Category: Tag:

*On the large size tree the left and right mid bottom mounts may require a single spice of the pixel strings on each side to add additional wire to clear around the mounts.*

Please follow and like us:
Pin Share
Mini Tree Size

Mini – 100 nodes, Small – 250 nodes, Medium – 400 nodes, Large – 1100 nodes


There are no reviews yet.

Be the first to review “GE Flat Mini Tree Mounts Metric STL”