ChromaStar 36 Mount STL


3D Printed mounting system for the Boscoyo Studios ChromaStar 36. These mounts are designed to add additional strength and provide a more solid mounting point when attaching the ChromaStar 36 to a mega tree topper. There are two conduit sizes available for the mounts and both are supplied with the purchase. The first is a combination 1/2″ threaded pipe and 1/2″ EMT conduit where the threaded pipe can connect to a floor flange installed on the topper, or alternatively they can be made with 3/4″ EMT conduit which is compatible with Maker Pipe fittings. Both styles utilize a 3/4″ PVC cross for the center junction which in combination with the supplied bushing files, allow the conduit and / or threaded pipe to slide through. The vertical section of threaded pipe or conduit rests on top of the stock Boscoyo center support clamps which will then align with the height of the mounts. Due to the close proximity of the PVC cross to the center coro support clamps, you will need to trim away some material on the support clamps to provide enough clearance for the PVC cross to fit.

Note: This is a digital purchase for STL files and not a physical product. 

SKU: N/A Category: Tag:

3 Ring, 6 Ring


There are no reviews yet.

Be the first to review “ChromaStar 36 Mount STL”