Candy Cane Spinner Mount UK STL
3D Printed mounting system for the Gilbert Engineering Candy Cane Spinner. The mounts work with both the Love and Without Love versions. The STL files contain special versions made for 20mm conduit available from Screwfix and a bushing that allows for a 25mm PVC cross to be used for the center junction. They are zip tied to the coro and and provide a frame structure to increase strength and allow mounting to various surfaces.
Important: The hole patterns on the Candy Cane Spinner are slightly asymmetric to the center line of the prop by a couple of millimeters. However the mounts themselves are symmetrical, so it is recommended to use a long straight edge to mark the horizontal and vertical center lines of the prop and center the outer mounts on the true center line. Do not to use the pixel holes to line up the outer mounts. The mounts have large enough pixel openings to account for this discrepancy. Before fully tightening the zip ties on the mounts, run the conduit through all the mount pieces so the position can be adjusted as necessary.