Rosa Wreath 46″ Mount STL


3D Printed mounting system for the Gilbert Engineering Rosa Wreath 46″. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The STL files contain versions that fit both 1/2″ EMT conduit and 1/2″ PVC pipe. EMT is recommended for added rigidity and because one of the EMT sections can run continuously through the center of the prop.

Note: The Rosa Wreath has some zip tie holes that our outer mounts utilize. The holes cut on the coro are not centered relative to the centerline of the prop and this would require separate mounts for each side in order to align which is unnecessary and inefficient. The holes on our mounts are perfectly centered and thus will not completely align with the precut hole, but will still be usable.

Note: This is a digital purchase for STL files and not a physical product. 

SKU: N/A Category: Tags: ,

The very first Rosa Wreaths that were made prior to mid 2020 have a larger circular opening at the center of the prop. In the unlikely event that you have one of these older versions or think you may have one, please message us prior to ordering so we can verify and supply a different style of center mount for the prop.

Please follow and like us:
Pin Share

Newer 3.75" Center, Older 6" Center


There are no reviews yet.

Be the first to review “Rosa Wreath 46″ Mount STL”