Hattitude Quartet Mount 20mm STL

3D Printed mounting system for the Gilbert Engineering Hattitude Quartet. The mounts provide a frame structure behind the coro to increase strength and allow mounting to various surfaces as well as provide rigidity to the prop after it has been slit in half for shipping. The mounts are sized for 20mm conduit and are designed to be zip tied to the coro. The conduit slides through the mounts with the center junction utilizing a 25mm PVC cross which allows the smaller conduit to pass through with the included bushing file. The conduit is then secured to the mounts using screws to lock the mounting frame in place to the prop. If your prop has the reenforcing backer plates, the two side backer plates are not used with these mounts and may be discarded.

For those in the UK, the links below are where you can get the conduit and PVC fittings.

Link to Conduit

Link to PVC Cross

Note: This is a digital purchase for STL files and not a physical product.