This STL file set contains everything needed to 3D print the mounting system designed specifically for the Gilbert Engineering Starburst prop. The brackets are designed to be zip-tied directly to the coro and sized for 1/2″ EMT conduit, which slides through the mounts to form the frame. At the center junction, a 1/2″ PVC cross is used to connect the perpendicular conduit sections, using the included bushings file to adapt for EMT’s slightly smaller diameter. Also at the center junction, you will need to drill the PVC and conduit to accept a 1/4″ bolt to secure the mounts in place—see below for more information. Once the conduit is in place, it is fastened to the mounts with screws, locking everything together to create a strong, rigid structure behind the prop. This setup provides excellent stability for mounting to various surfaces and is especially useful for reinforcing props that have been split for shipping. Please select the size of your Starburst when purchasing.
Note: This is a digital purchase for STL files and not a physical product.
As with all our designs, we strive to utilize the precut zip tie hole locations for our mounts. However, these pre-made holes don’t always align perfectly for optimal mount placement, which means you may need to create additional holes in the coro to secure the mounts with zip ties.
The menu you selected is for STL files which are digital product downloads and not physical 3D printed parts. These are for printing on your own personal 3D printer only. If you are shopping for the ready made 3D printed parts then you should remove any STL files from your cart and select the products from the “3D Printed Designs” menu on the website.
Reviews
There are no reviews yet.