Meanwell LRS 350 Spacers


These Meanwell LRS 350 spacers are used in combination with either our 50 Caliber Ammo Box Mounting System or the Meanwell LRS 350 Mounting Rack. The spacers are sold as a set with two spacers and are only needed when multiple power supplies are stacked AND when using one of our larger controller mounts that attaches to both sides of the power supply. Since those controller mounts fit tight to the power supply, the standoffs on the ammo box mount or the mounting rack sides needs to be attached outside of the controller mounts. This means on the lower power supply a spacer is needed make everything on the same plane.

For our controller mounts that only attach to the power supply on one side, which are the majority of the ones we make, the spacers are not needed since the mount can be installed outside of the standoffs or mounting rack sides. However if one desired to have the controller mount on the inside and the standoffs / mounting rack on the outside, then one would need to use the spacers on the lower power supply.

Example pics show how the spacer fits in combination with the standoffs from the 50 caliber ammo box mounts and a F16 mount. Colors may vary, typically they are white or black. If you have a specific color request for white or black please include a note indicating your preference with your order, but keep in mind that it may increase processing time for in-stock items. Includes 3D printed parts only. Keep scrolling down to see a list of all mounts that attach on both sides of the power supply.

Availability: Only 7 left in stock (then additional ones are made to order)

SKU: LRS-SPCR Category: Tag:

In order to alleviate any confusion, below is a list of the controller mounts which attach to both sides of the power supply.

  • Genius 16 Mount to Meanwell LRS 350
  • Kulp K16A-B to Meanwell LRS 350
  • Falcon F16 Mount to Meanwell LRS 350
  • Falcon F48 Mount to Meanwell LRS 350
  • Dual F8 Distro v1.02 or newer to Meanwell LRS 350
  • Holiday Coro Flex Expansion Board Mount to Meanwell LRS 350
  • Raspberry Pi & F8 Distro to Meanwell LRS 350
  • QuinLED Dig Octa to Meanwell LRS 350 Mount

3D printing parts is a slow process and we have a whole print farm running 24/7 to fulfill orders and build stock of the more popular items. If you order a product that shows “made to order” we will move it directly to the print queue where it will be printed as soon as possible. While normal processing times for most orders with made to order items is less than a week, it can fluctuate. Very large orders can also experience longer than normal processing times as well because of the high number of hours it takes to produce lots of parts. If processing times are expected to be longer than two weeks before shipping, there will be a banner at the top of the website indicating the expected wait times. See the FAQ page for more info.

All of our 3D printed parts use PETG filament which provides good flexibility and resistance to UV exposure when used seasonally.

Please follow and like us:
Pin Share
Weight 1.5 oz


There are no reviews yet.

Be the first to review “Meanwell LRS 350 Spacers”

You may also like…